NGEE

Scott Simmons Scott Simmons

0 Course Enrolled • 0 Course Completed

Biography

Reliable RCNI Test Forum, Valid RCNI Exam Tutorial

In addition to the PDF questions DumpsValid offers desktop RUCKUS Certified Networking Implementer (RCNI) practice exam software and web-based RUCKUS Certified Networking Implementer (RCNI) practice exam, to help you cope with RUCKUS Certified Networking Implementer (RCNI) exam anxiety. These RUCKUS RCNI Practice Exams simulate the actual RUCKUS RCNI exam conditions and provide you with an accurate assessment of your readiness for the RCNI exam.

RUCKUS RCNI Exam Syllabus Topics:

Topic
Details

Topic 1

ICX Solution Troubleshooting: RUCKUS ICX networking Engineers are expected to demonstrate troubleshooting skills in this section. It covers basic networking troubleshooting techniques and procedures for performing ICX switch recovery. Candidates should be able to identify and resolve common network issues in ICX environments.

Topic 2

RUCKUS Products & Solutions: RUCKUS ICX networking Engineers are expected to showcase their knowledge of RUCKUS products and solutions in this section. It focuses primarily on the ICX product line, covering various switch models and their capabilities. Candidates should be familiar with the features, specifications, and use cases of different ICX switches.

Topic 3

ICX Solution Implementation: This significant portion of the exam assesses the skills of RUCKUS ICX Network Administrators in implementing ICX solutions. It covers ICX software management, stacking capabilities, PoE configuration, Layer 2
3 protocols, and ICX services, IPv4
IPv6 addressing on switch interfaces, ICX switch management methods, and configuring multicast and security features. Candidates should be able to demonstrate proficiency in configuring stacking for scalable network deployments.

Topic 4

Foundational Networking Concepts: This section of the exam measures the skills of RUCKUS ICX Network Administrators and covers essential networking concepts. It includes VLAN design and configuration, STP and loop prevention protocols, PoE requirements, basic LAN concepts, Layer 3 routing configurations, and basic QoS concepts. Candidates should be able to demonstrate proficiency in designing VLANs for network segmentation.

>> Reliable RCNI Test Forum <<

Valid RUCKUS RCNI Exam Tutorial | RCNI Certification Test Questions

If you want to pass the exam smoothly buying our RCNI study materials is your ideal choice. They can help you learn efficiently, save your time and energy and let you master the useful information. Our passing rate of RCNI study materials is very high and you needn’t worry that you have spent money and energy on them but you gain nothing. We provide the great service after you purchase our RCNI Study Materials and you can contact our customer service at any time during one day.

RUCKUS Certified Networking Implementer Sample Questions (Q10-Q15):

NEW QUESTION # 10
In the following output, what is the bridge priority of the root in hex?

A. 9c49
B. 0
C. 1
D. 2

Answer: D

Explanation:
* Understanding Bridge Priority:
* The bridge priority in the Spanning Tree Protocol (STP) is represented in hexadecimal format in RUCKUS ICX switches.
* In the output, the bridge priority is a combination of the priority value (default is 32768 or
0x8000 in hex) and the VLAN ID.
* Why It Is 8000:
* Unless explicitly modified, the default bridge priority is 8000 in hexadecimal.
* Why Other Options Don't Apply:
* B. 0: This value does not align with the default or modified priority values.
* C. 9c49: This might represent a different component of the output, such as MAC address.
* D. 20009: This is an incorrect representation of the bridge priority.
References:
* ICX Spanning Tree Configuration Guide: RUCKUS Documentation

NEW QUESTION # 11
In a core/edge network topology, which ports should have Root Guard enabled?

A. core ports facing the edge
B. edge ports facing the core
C. route-only ports facing the WAN
D. management ports at the core

Answer: A

Explanation:
In a core/edge network topology, Root Guard is a Spanning Tree Protocol (STP) feature that prevents designated ports from becoming root ports. This ensures that the core switch remains the root bridge, maintaining a stable and predictable network topology.
Configuration Steps:
* Identify Core Ports Facing the Edge:
* Determine which ports on the core switch connect to edge switches.
* Enable Root Guard on These Ports:
* Access the core switch's configuration mode.
* For each identified port, apply the Root Guard configuration:
interface ethernet 1/1/1
spanning-tree root-guard
* Replace 1/1/1 with the actual port identifier.
Example Configuration:
arduinoICX(config)# interface ethernet 1/1/1
ICX(config-if-e1000-1/1/1)# spanning-tree root-guard
This configuration ensures that port 1/1/1 on the core switch will not accept superior BPDUs, preventing edge switches from becoming the root bridge.

NEW QUESTION # 12
A Core, Aggregation, Edge topology network is running Rapid Spanning Tree Protocol (RSTP). Two switches at the edge are legacy and run 802.1D.
To influence the convergence time of the legacy switches at the edge, where are the timers modified?

A. on the two legacy 802.1D switches at the edge
B. the route-only port on the upstream gateway
C. on the Aggregation switches connected to the legacy edge switches
D. on the root bridge at the core

Answer: C

Explanation:
* RSTP and Legacy 802.1D Compatibility:
* RSTP (802.1w) can interoperate with legacy switches running STP (802.1D). However, the legacy switches use different timers and convergence mechanisms, which can lead to delays.
* Optimizing Timers for Legacy Edge Switches:
* The edge switches running 802.1D rely on BPDU timing set by the upstream aggregation switches.
* To influence the convergence time, the timers such as hello time, max age, and forward delay must be adjusted on the aggregation switches connected to these legacy edge switches. This ensures better compatibility and faster convergence.
* Why Not Other Options?
* A: The route-only port does not participate in STP.
* B: Timers cannot be modified on legacy switches themselves as they strictly follow 802.1D standards.
* D: The root bridge sets global parameters but does not address edge-specific timer optimization.
References:
* RUCKUS RSTP/802.1D Compatibility Guide: RUCKUS Documentation

NEW QUESTION # 13
Review the following configuration.

A RADIUS server is connected and working. However, a switch technician has forgotten the RADIUS username/password for the ICX. When RADIUS is not functioning, they expect to be able to plug into the console port and use the local username/password as a backup.
The ICX does not accept the local password.
Why can't the technician log in?

A. Based on the AAA login command, local should be in front of radius for correct backup operation.
B. Based on the AAA login command, local password will only be used if the RADIUS server is unavailable.
C. The AAA web-server configuration is missing the radius keyword.
D. Local username/password is only used for SSH and web access.

Answer: B

NEW QUESTION # 14
What are two features of Open Shortest Path First (OSPF)? (Choose two.)

A. automatic redistribution of routes
B. updates routes dynamically
C. calculates link cost
D. utilizes distance vector
E. uses exterior gateway protocols

Answer: B,D

NEW QUESTION # 15
......

To some extent, to pass the RCNI exam means that you can get a good job. The RCNI exam materials you master will be applied to your job. The possibility to enter in big and famous companies is also raised because they need outstanding talents to serve for them. Our RCNI Test Prep is compiled elaborately and will help the client a lot. Our product is of high quality and the passing rate and the hit rate are both high.

Valid RCNI Exam Tutorial: https://www.dumpsvalid.com/RCNI-still-valid-exam.html